Independent materials reference Manufacturer-linked sourcesResins · Elastomers · Technical documents
Smooth-On / Material reference
Epoxy

EpoxAcast™ 650 BLACK + 101 Hardener

EpoxAcast™ 650 BLACK + 101 Hardener is listed by Smooth-On as an epoxy resin system. The source reports mixed viscosity of 7,000 cps, mix ratio by weight of 100A:12B, pot life of 20 minutes. This record connects 22 reported fields with 16 manufacturer document links. Review the original technical data sheet for the applicable test conditions and processing instructions.

Technical data sheet Safety data sheet
7,000 cpsManufacturer-reported
100A:12BManufacturer-reported
20 minutesManufacturer-reported
1 hourManufacturer-reported
1.52 g/ccManufacturer-reported

Technical & safety documents

16 links
Files open on the manufacturer's document host. Region and language follow the source listing; confirm the revision inside the file.
Open original PDF
TDS
Technical BulletinEnglish · Not specified
Open file
SDS
EpoxAcast 650 BLACK (Part A) SDS | EnglishEnglish · United States & Canada
Open file
SDS
101 Hardener (Part B) SDS | EnglishEnglish · United States & Canada
Open file
SDS
101 Hardener (Part B) SDS | SpanishSpanish · United States & Canada
Open file
SDS
101 Hardener (Part B) SDS | FrenchFrench · United States & Canada
Open file
SDS
101 Hardener (Part B) SDS | EnglishEnglish · United Kingdom & European Union
Open file
SDS
101 Hardener (Part B) SDS | SpanishSpanish · United Kingdom & European Union
Open file
SDS
101 Hardener (Part B) SDS | FrenchFrench · United Kingdom & European Union
Open file
SDS
101 Hardener (Part B) SDS | GermanGerman · United Kingdom & European Union
Open file
SDS
101 Hardener (Part B) SDS | ItalianItalian · United Kingdom & European Union
Open file
SDS
101 Hardener (Part B) SDS | GreekGreek · United Kingdom & European Union
Open file
SDS
101 Hardener (Part B) SDS | DutchDutch · United Kingdom & European Union
Open file
SDS
101 Hardener (Part B) SDS | PolishPolish · United Kingdom & European Union
Open file
SDS
101 Hardener (Part B) SDS | CzechCzech · United Kingdom & European Union
Open file
SDS
101 Hardener (Part B) SDS | HungarianHungarian · United Kingdom & European Union
Open file
SDS
101 Hardener (Part B) SDS | NorwegianNorwegian · United Kingdom & European Union
Open file

Reported specifications

22 fields
Material and processing data
PropertyReported valueEvidence
Mixed Viscosity7,000 cpsManufacturer table
ColorBlackManufacturer table
Mix Ratio By Weight100A:12BManufacturer table
Pot Life20 minutesManufacturer table
Cure Time1 hourManufacturer table
Barcol 935 Hardness93Manufacturer table
Specific Gravity1.52 g/ccManufacturer table
Specific Volume18.22 cu. in./lb.Manufacturer table
Compressive Strength16,350 psiManufacturer table
Flexural Modulus710,000 psiManufacturer table
Flexural Strength5,890 psiManufacturer table
Heat Deflection Temp129 °FManufacturer table
Shrinkage0.001 in./in.Manufacturer table
Tensile Modulus1,503,000 psiManufacturer table
Ultimate Tensile6,000 psiManufacturer table
Volume Resistance>5.42E+11 ohmManufacturer table
Volume Resistivity>3.59E+15 ohm/cmManufacturer table
Dielectric Strength404 volts/milManufacturer table
Tensile Elongation0.42 %Manufacturer table
Compressive Modulus142,600 psiManufacturer table
Dielectric Constant k' @ 60Hz5.3Manufacturer table
Dielectric Constant k' @ 1kHz5.08Manufacturer table
Reported values are not independent test results. Original units and table wording are preserved. Extracted TDS rows can depend on the grade, component and source table headings; use the linked page to verify that context. Test methods, sample preparation and cure schedules may differ; consult the original TDS before making a performance comparison.

Selection & processing checks

Compare the complete resin–hardener system. A different hardener or cure schedule can change the cured properties.

  • Is the stated ratio by weight or by volume?
  • Do the thermal and mechanical values use the same cure schedule?
  • Is the formulation designed for casting, bonding or encapsulation?
  • Confirm the complete product designation, including any hardener, color or formulation suffix.
  • Read the current SDS for handling, protective equipment, storage and disposal information.

The reported weight ratio for this record is 100A:12B. A weight ratio must not be used as a volume ratio without the appropriate density information.

Missing properties are not estimated. Similar values or shared application labels do not establish a drop-in replacement.

Other materials in this family

View collection
Material / manufacturerFamilyKey specificationDocumentsAdd to comparison
EPO-TEK® H20EEpoxy TechnologyEpoxy2,200 - 3,200 cPsViscosity (23°C) @ 100 rpm3 linked
EPO-TEK® MED-353NDPEpoxy TechnologyEpoxy3,600 cPsViscosity (23°C) @ 50 rpm2 linked
EPO-TEK® 310M-2Epoxy TechnologyEpoxy250 - 325 cPsViscosity (23°C) @ 100 rpm3 linked
EPO-TEK® 353ND BlackEpoxy TechnologyEpoxy3,000 - 5,000 cPsViscosity (23°C) @ 50 rpm3 linked
Related records are browsing suggestions, not validated substitutes.