Epoxy Technology / Material reference
EpoxyEPO-TEK® 375-T
EPO-TEK® 375-T is listed by Epoxy Technology as an epoxy adhesive / resin system. This record connects 12 reported fields with 2 manufacturer document links. Review the original technical data sheet for the applicable test conditions and processing instructions.
Two | Minimum Alternative Cure(s):Manufacturer-reported
10 : 1 | May not achieve performance properties listed belowManufacturer-reported
Part A: 1.12 | Part B: 1.00Manufacturer-reported
5 HoursManufacturer-reported
5 months at room temperature | 100°C / 60 MinutesManufacturer-reported
Part A: Tan | Part B: AmberManufacturer-reported
Technical & safety documents
2 linksFiles open on the manufacturer's document host. Region and language follow the source listing; confirm the revision inside the file.
EPO-TEK® 375-TEnglish · Not specified
Open file EPO-TEK® 375-TEnglish · Not specified
Open file Reported specifications
12 fieldsMaterial and processing data
| Property | Reported value | Evidence |
|---|---|---|
| No. of Components | Two | Minimum Alternative Cure(s): | Technical data sheet · p. 1 |
| Mix Ratio by Weight | 10 : 1 | May not achieve performance properties listed below | Technical data sheet · p. 1 |
| Specific Gravity | Part A: 1.12 | Part B: 1.00 | Technical data sheet · p. 1 |
| Pot Life | 5 Hours | Technical data sheet · p. 1 |
| Shelf Life- Bulk | 5 months at room temperature | 100°C / 60 Minutes | Technical data sheet · p. 1 |
| Color (before cure) | Part A: Tan | Part B: Amber | Technical data sheet · p. 1 |
| Consistency | Smooth slightly thixotropic paste | Technical data sheet · p. 1 |
| Viscosity (23°C) @ 20 rpm | 11,673 cPs | Technical data sheet · p. 1 |
| Glass Transition Temp | 111 °C (Dynamic Cure: 20-200°C/ISO 25 Min; Ramp -10-200°C @20°C/Min) | Technical data sheet · p. 1 |
Manufacturer classification
| Brand | Epoxy Technology |
| Technology | Epoxy |
| Market | Electronics Optical, Datacom and Telecom |
Reported values are not independent test results. Original units and table wording are preserved. Extracted TDS rows can depend on the grade, component and source table headings; use the linked page to verify that context. Test methods, sample preparation and cure schedules may differ; consult the original TDS before making a performance comparison.
Selection & processing checks
Compare the complete resin–hardener system. A different hardener or cure schedule can change the cured properties.
- Is the stated ratio by weight or by volume?
- Do the thermal and mechanical values use the same cure schedule?
- Is the formulation designed for casting, bonding or encapsulation?
- Confirm the complete product designation, including any hardener, color or formulation suffix.
- Read the current SDS for handling, protective equipment, storage and disposal information.
Missing properties are not estimated. Similar values or shared application labels do not establish a drop-in replacement.
Other materials in this family
View collection| Material / manufacturer | Family | Key specification | Documents | Add to comparison |
|---|---|---|---|---|
| Epsilon™ PRO | Epoxy | 4,000 cps | 15 linked | |
| Tarbender™ | Epoxy | 1,100 cps | 2 linked | |
| XTC-3D™ COAT | Epoxy | 350 cps | 18 linked | |
| 10-3713 | Epoxy | 650 | 3 linked |