Epoxies, Etc. / Material reference
Epoxy10-3713
10-3713 is listed by Epoxies, Etc. as an epoxy adhesive / resin system. This record connects 12 reported fields with 3 manufacturer document links. Review the original technical data sheet for the applicable test conditions and processing instructions.
650Manufacturer-reported
ClearManufacturer-reported
80Manufacturer-reported
45 minutesManufacturer-reported
1.11Manufacturer-reported
9,400Manufacturer-reported
Technical & safety documents
3 linksFiles open on the manufacturer's document host. Region and language follow the source listing; confirm the revision inside the file.
10-3713R TDSEnglish · Not specified
Open file 10-3713CCL SDSEnglish · Not specified
Open file 10-3713RCL SDSEnglish · Not specified
Open file Reported specifications
12 fieldsMaterial and processing data
| Property | Reported value | Evidence |
|---|---|---|
| Viscosity, 25C, cps | 650 | Technical data sheet · p. 1 |
| Color | Clear | Technical data sheet · p. 1 |
| Hardness, Shore D | 80 | Technical data sheet · p. 1 |
| Pot Life, 25C | 45 minutes | Technical data sheet · p. 1 |
| Specific Gravity, 25C | 1.11 | Technical data sheet · p. 1 |
| Tensile strength, psi | 9,400 | Technical data sheet · p. 1 |
| Thermal conductivity, W/m-K | 0.42 | Technical data sheet · p. 1 |
| Dielectric strength, V/mil | 560 | Technical data sheet · p. 1 |
| Volume resistivity, ohm-cm | 5.0x1015 | Technical data sheet · p. 1 |
Manufacturer classification
| Brand | Epoxies, Etc. |
| Technology | Epoxy |
| Market | Aerospace and Defense Electronics |
Reported values are not independent test results. Original units and table wording are preserved. Extracted TDS rows can depend on the grade, component and source table headings; use the linked page to verify that context. Test methods, sample preparation and cure schedules may differ; consult the original TDS before making a performance comparison.
Selection & processing checks
Compare the complete resin–hardener system. A different hardener or cure schedule can change the cured properties.
- Is the stated ratio by weight or by volume?
- Do the thermal and mechanical values use the same cure schedule?
- Is the formulation designed for casting, bonding or encapsulation?
- Confirm the complete product designation, including any hardener, color or formulation suffix.
- Read the current SDS for handling, protective equipment, storage and disposal information.
Missing properties are not estimated. Similar values or shared application labels do not establish a drop-in replacement.
Other materials in this family
View collection| Material / manufacturer | Family | Key specification | Documents | Add to comparison |
|---|---|---|---|---|
| Epsilon™ PRO | Epoxy | 4,000 cps | 15 linked | |
| Tarbender™ | Epoxy | 1,100 cps | 2 linked | |
| XTC-3D™ COAT | Epoxy | 350 cps | 18 linked | |
| EPO-TEK® 375-T | Epoxy | 11,673 cPs | 2 linked |