Epoxies, Etc. / Material reference
Epoxy20-3305
20-3305 is listed by Epoxies, Etc. as an epoxy adhesive / resin system. This record connects 10 reported fields with 3 manufacturer document links. Review the original technical data sheet for the applicable test conditions and processing instructions.
50Manufacturer-reported
70Manufacturer-reported
100:25Manufacturer-reported
1,550Manufacturer-reported
1857Manufacturer-reported
2.62 x 1016Manufacturer-reported
Technical & safety documents
3 linksFiles open on the manufacturer's document host. Region and language follow the source listing; confirm the revision inside the file.
20-3305 TDSEnglish · Not specified
Open file 20-3305RTA Resin SDSEnglish · Not specified
Open file 20-3305CTB Catalyst SDSEnglish · Not specified
Open file Reported specifications
10 fieldsMaterial and processing data
| Property | Reported value | Evidence |
|---|---|---|
| Gel Time, Minutes, 30 gram mass, 120 °C | 50 | Technical data sheet · p. 1 |
| Hardness, Shore D @ 25°C | 70 | Technical data sheet · p. 1 |
| Mix Ratio, By Weight | 100:25 | Technical data sheet · p. 1 |
| Tensile Strength, psi | 1,550 | Technical data sheet · p. 1 |
| Dielectric Strength, V/mil | 1857 | Technical data sheet · p. 1 |
| Volume Resistivity, ohm-cm | 2.62 x 1016 | Technical data sheet · p. 1 |
Manufacturer classification
| Brand | Epoxies, Etc. |
| Technology | Epoxy |
| Application | E-mobility |
| Market | Aerospace and Defense Automotive and Transportation Electronics |
Reported values are not independent test results. Original units and table wording are preserved. Extracted TDS rows can depend on the grade, component and source table headings; use the linked page to verify that context. Test methods, sample preparation and cure schedules may differ; consult the original TDS before making a performance comparison.
Selection & processing checks
Compare the complete resin–hardener system. A different hardener or cure schedule can change the cured properties.
- Is the stated ratio by weight or by volume?
- Do the thermal and mechanical values use the same cure schedule?
- Is the formulation designed for casting, bonding or encapsulation?
- Confirm the complete product designation, including any hardener, color or formulation suffix.
- Read the current SDS for handling, protective equipment, storage and disposal information.
Missing properties are not estimated. Similar values or shared application labels do not establish a drop-in replacement.
Other materials in this family
View collection| Material / manufacturer | Family | Key specification | Documents | Add to comparison |
|---|---|---|---|---|
| EpoxAcoat™ HT | Epoxy | Light Paste | 2 linked | |
| Free Form™ SCULPT | Epoxy | Putty | 2 linked | |
| Habitat Cast N Coat™ | Epoxy | 13,500 cps | 3 linked | |
| EPSILON™ + 101 Hardener | Epoxy | Variable | 2 linked |