Smooth-On / Material reference
EpoxyHabitat Cast N Coat™
Habitat Cast N Coat™ is listed by Smooth-On as an epoxy resin system. The source reports mixed viscosity of 13,500 cps, mix ratio by weight of 1A:1B, pot life of 85 minutes. This record connects 10 reported fields with 3 manufacturer document links. Review the original technical data sheet for the applicable test conditions and processing instructions.
13,500 cpsManufacturer-reported
1A:1BManufacturer-reported
85 minutesManufacturer-reported
16 hoursManufacturer-reported
85Manufacturer-reported
1.51 g/ccManufacturer-reported
Technical & safety documents
3 linksFiles open on the manufacturer's document host. Region and language follow the source listing; confirm the revision inside the file.
Technical BulletinEnglish · Not specified
Open file E84 Class A Flame CertificationEnglish · Not specified
Open file Habitat Cast N Coat SDS | EnglishEnglish · United States & Canada
Open file Reported specifications
10 fieldsMaterial and processing data
| Property | Reported value | Evidence |
|---|---|---|
| Mixed Viscosity | 13,500 cps | Manufacturer table |
| Color | Tan | Manufacturer table |
| Mix Ratio By Volume | 1A:1B | Manufacturer table |
| Mix Ratio By Weight | 1A:1B | Manufacturer table |
| Pot Life | 85 minutes | Manufacturer table |
| Cure Time | 16 hours | Manufacturer table |
| Shore D Hardness | 85 | Manufacturer table |
| Specific Gravity | 1.51 g/cc | Manufacturer table |
| Specific Volume | 18.35 cu. in./lb. | Manufacturer table |
| Heat Deflection Temp | 131 °F | Manufacturer table |
Reported values are not independent test results. Original units and table wording are preserved. Extracted TDS rows can depend on the grade, component and source table headings; use the linked page to verify that context. Test methods, sample preparation and cure schedules may differ; consult the original TDS before making a performance comparison.
Selection & processing checks
Compare the complete resin–hardener system. A different hardener or cure schedule can change the cured properties.
- Is the stated ratio by weight or by volume?
- Do the thermal and mechanical values use the same cure schedule?
- Is the formulation designed for casting, bonding or encapsulation?
- Confirm the complete product designation, including any hardener, color or formulation suffix.
- Read the current SDS for handling, protective equipment, storage and disposal information.
The reported weight ratio for this record is 1A:1B. A weight ratio must not be used as a volume ratio without the appropriate density information.
Missing properties are not estimated. Similar values or shared application labels do not establish a drop-in replacement.