Independent materials reference Manufacturer-linked sourcesResins · Elastomers · Technical documents
Smooth-On / Material reference
Silicone

Solaris™

Solaris™ is listed by Smooth-On as a platinum-cure silicone rubber. The source reports mixed viscosity of 1,200 cps, mix ratio by weight of 1A:1B, pot life of 240 minutes. This record connects 22 reported fields with 20 manufacturer document links. Review the original technical data sheet for the applicable test conditions and processing instructions.

Technical data sheet Safety data sheet
1,200 cpsManufacturer-reported
1A:1BManufacturer-reported
240 minutesManufacturer-reported
24 hoursManufacturer-reported
15Manufacturer-reported
0.99 g/ccManufacturer-reported

Technical & safety documents

20 links
Files open on the manufacturer's document host. Region and language follow the source listing; confirm the revision inside the file.
Open original PDF
TDS
Technical BulletinEnglish · Not specified
Open file
SDS
Solaris® Bonding Primer SDSEnglish · Not specified
Open file
SDS
Solaris SDS | EnglishEnglish · United States & Canada
Open file
SDS
Solaris SDS | SpanishSpanish · United States & Canada
Open file
SDS
Solaris SDS | FrenchFrench · United States & Canada
Open file
SDS
Solaris SDS | EnglishEnglish · South & Central America
Open file
SDS
Solaris SDS | SpanishSpanish · South & Central America
Open file
SDS
Solaris SDS | EnglishEnglish · United Kingdom & European Union
Open file
SDS
Solaris SDS | SpanishSpanish · United Kingdom & European Union
Open file
SDS
Solaris SDS | FrenchFrench · United Kingdom & European Union
Open file
SDS
Solaris SDS | GermanGerman · United Kingdom & European Union
Open file
SDS
Solaris SDS | ItalianItalian · United Kingdom & European Union
Open file
SDS
Solaris SDS | GreekGreek · United Kingdom & European Union
Open file
SDS
Solaris SDS | DutchDutch · United Kingdom & European Union
Open file
SDS
Solaris SDS | PolishPolish · United Kingdom & European Union
Open file
SDS
Solaris SDS | CzechCzech · United Kingdom & European Union
Open file
SDS
Solaris SDS | HungarianHungarian · United Kingdom & European Union
Open file
SDS
Solaris SDS | NorwegianNorwegian · United Kingdom & European Union
Open file
SDS
Solaris SDS | EnglishEnglish · Australia & New Zealand
Open file
SDS
Solaris Bonding Primer SDS | EnglishEnglish · United States & Canada
Open file

Reported specifications

22 fields
Material and processing data
PropertyReported valueEvidence
Mixed Viscosity1,200 cpsManufacturer table
CatalystPlatinumManufacturer table
ColorClearManufacturer table
Mix Ratio By Volume1A:1BManufacturer table
Mix Ratio By Weight1A:1BManufacturer table
Pot Life240 minutesManufacturer table
Cure Time24 hoursManufacturer table
Shore A Hardness15Manufacturer table
Specific Gravity0.99 g/ccManufacturer table
Specific Volume28.1 cu. in./lb.Manufacturer table
Elongation @ Break290 %Manufacturer table
Index of Refraction at 20°C1.41Manufacturer table
100% Modulus25 psiManufacturer table
Shrinkage<.001 in./in.Manufacturer table
Tensile Strength180 psiManufacturer table
Thermal Conductivity0.18 W/M*KManufacturer table
Useful Temperature (min)-149 °FManufacturer table
Useful Temperature (max)400 °FManufacturer table
Volume Resistivity3.16E+15 ohm/cmManufacturer table
Dielectric Strength366 volts/milManufacturer table
Dielectric Constant, 100Hz2.78Manufacturer table
Dissipation Factor, 100Hz0.00Manufacturer table
Reported values are not independent test results. Original units and table wording are preserved. Extracted TDS rows can depend on the grade, component and source table headings; use the linked page to verify that context. Test methods, sample preparation and cure schedules may differ; consult the original TDS before making a performance comparison.

Selection & processing checks

Check the exact cure chemistry and intended substrate. Silicone rubber and silicone resin are distinct material types; this collection includes elastomers.

  • Is the material addition-cure, condensation-cure or a one-part system?
  • Which substrates and cure-inhibition precautions are listed?
  • Are the reported tear strength and elongation measured under comparable conditions?
  • Confirm the complete product designation, including any hardener, color or formulation suffix.
  • Read the current SDS for handling, protective equipment, storage and disposal information.

The reported weight ratio for this record is 1A:1B. A weight ratio must not be used as a volume ratio without the appropriate density information.

Missing properties are not estimated. Similar values or shared application labels do not establish a drop-in replacement.

Other materials in this family

View collection
Material / manufacturerFamilyKey specificationDocumentsAdd to comparison
20-1615Epoxies, Etc.Silicone6,000Viscosity, 25C, cps, mixed3 linked
PlatSil® 73-60 Silicone RubberPolytekSilicone40,000 cPMixed Viscosity3 linked
PlatSil® 73-25 Silicone RubberPolytekSilicone6,000 cPMixed Viscosity2 linked
PlatSil® Gel-10PolytekSilicone15,000 cPMixed Viscosity2 linked
Related records are browsing suggestions, not validated substitutes.