Polytek / Material reference
SiliconePlatSil® Gel-10
PlatSil® Gel-10 is listed by Polytek as a silicone rubber. The source reports mixed viscosity of 15,000 cP, mix ratio by weight of 1A:1B. This record connects 14 reported fields with 2 manufacturer document links. Review the original technical data sheet for the applicable test conditions and processing instructions.
15,000 cPManufacturer-reported
1A:1BManufacturer-reported
1.1Manufacturer-reported
228 psiManufacturer-reported
Technical & safety documents
2 linksFiles open on the manufacturer's document host. Region and language follow the source listing; confirm the revision inside the file.
PlatSil® Gel-10 — Technical BulletinEnglish · Not specified
Open file PlatSil® Gel-10 — Safety Data SheetEnglish · Not specified
Open file Reported specifications
14 fieldsMaterial and processing data
| Property | Reported value | Evidence |
|---|---|---|
| Mix Ratio by Volume | 1A:1B | Manufacturer table |
| Mix Ratio by Weight | 1A:1B | Manufacturer table |
| Shore Hardness | A10 | Manufacturer table |
| Pour Time | 6 min. | Manufacturer table |
| Demold Time | 30 min. | Manufacturer table |
| Cured Color | Milky White | Manufacturer table |
| Mixed Viscosity | 15,000 cP | Manufacturer table |
| Specific Volume | 25 in³/lb | Manufacturer table |
| Specific Gravity | 1.1 | Manufacturer table |
| Elongation | 970 % | Manufacturer table |
| Tensile Strength | 228 psi | Manufacturer table |
| Die B Tear Strength | 80 pli | Manufacturer table |
| Die T Tear Strength | 27 pli | Manufacturer table |
| Cure Inhibition | Contamination from sulfur (e.g., sulfur-based clay), amines, tin compounds, cured polyester resin, some paints and some silicone rubbers may inhibit surface cure of platinum-cured rubbers. | Manufacturer table |
Reported values are not independent test results. Original units and table wording are preserved. Extracted TDS rows can depend on the grade, component and source table headings; use the linked page to verify that context. Test methods, sample preparation and cure schedules may differ; consult the original TDS before making a performance comparison.
Selection & processing checks
Check the exact cure chemistry and intended substrate. Silicone rubber and silicone resin are distinct material types; this collection includes elastomers.
- Is the material addition-cure, condensation-cure or a one-part system?
- Which substrates and cure-inhibition precautions are listed?
- Are the reported tear strength and elongation measured under comparable conditions?
- Confirm the complete product designation, including any hardener, color or formulation suffix.
- Read the current SDS for handling, protective equipment, storage and disposal information.
The reported weight ratio for this record is 1A:1B. A weight ratio must not be used as a volume ratio without the appropriate density information.
Missing properties are not estimated. Similar values or shared application labels do not establish a drop-in replacement.
Other materials in this family
View collection| Material / manufacturer | Family | Key specification | Documents | Add to comparison |
|---|---|---|---|---|
| Body Double™ Fast Set | Silicone | Brushable | 20 linked | |
| Body Double™ Standard Set | Silicone | Brushable | 20 linked | |
| Rebound™ 25 | Silicone | Brushable | 19 linked | |
| Rebound™ 40 | Silicone | Brushable | 19 linked |