FOAM-iT!™ 5
FOAM-iT!™ 5 is listed by Smooth-On as a polyurethane foam. The source reports mixed viscosity of 300 cps, mix ratio by weight of 100A:87B, pot life of 1.5 minutes. This record connects 11 reported fields with 14 manufacturer document links. Review the original technical data sheet for the applicable test conditions and processing instructions.
Technical & safety documents
14 linksReported specifications
11 fields| Property | Reported value | Evidence |
|---|---|---|
| Mixed Viscosity | 300 cps | Manufacturer table |
| Color | Beige | Manufacturer table |
| Mix Ratio By Volume | 1A:1B | Manufacturer table |
| Mix Ratio By Weight | 100A:87B | Manufacturer table |
| Pot Life | 1.5 minutes | Manufacturer table |
| Tack Free Time | 20 minutes | Manufacturer table |
| Cure Time | 2 hours | Manufacturer table |
| Foam Density | 5 lb/ft³ | Manufacturer table |
| Specific Gravity | 0.08 g/cc | Manufacturer table |
| Specific Volume | 315 cu. in./lb. | Manufacturer table |
| Expansion (approximate) | 10 times | Manufacturer table |
Selection & processing checks
Distinguish rigid casting plastics, elastomeric rubbers and foams. Their density, hardness scales and processing requirements are not interchangeable.
- Is this a solid material or an expanding foam?
- Which hardness scale and cure conditions are reported?
- What moisture-control and preparation steps does the manufacturer require?
- Confirm the complete product designation, including any hardener, color or formulation suffix.
- Read the current SDS for handling, protective equipment, storage and disposal information.
The reported weight ratio for this record is 100A:87B. A weight ratio must not be used as a volume ratio without the appropriate density information.
Missing properties are not estimated. Similar values or shared application labels do not establish a drop-in replacement.