TASK™ 11
TASK™ 11 is listed by Smooth-On as a polyurethane casting resin. The source reports mixed viscosity of 2,000 cps, mix ratio by weight of 100A:100B, pot life of 20 minutes. This record connects 11 reported fields with 15 manufacturer document links. Review the original technical data sheet for the applicable test conditions and processing instructions.
Technical & safety documents
15 linksReported specifications
11 fields| Property | Reported value | Evidence |
|---|---|---|
| Mixed Viscosity | 2,000 cps | Manufacturer table |
| Color | Translucent White | Manufacturer table |
| Mix Ratio By Weight | 100A:100B | Manufacturer table |
| Pot Life | 20 minutes | Manufacturer table |
| Cure Time | 16 hours | Manufacturer table |
| Shore D Hardness | 60 | Manufacturer table |
| Specific Gravity | 1.12 g/cc | Manufacturer table |
| Specific Volume | 24.7 cu. in./lb. | Manufacturer table |
| Elongation @ Break | 100 % | Manufacturer table |
| Shrinkage | 0.0024 in./in. | Manufacturer table |
| Tensile Strength | 2,500 psi | Manufacturer table |
Selection & processing checks
Distinguish rigid casting plastics, elastomeric rubbers and foams. Their density, hardness scales and processing requirements are not interchangeable.
- Is this a solid material or an expanding foam?
- Which hardness scale and cure conditions are reported?
- What moisture-control and preparation steps does the manufacturer require?
- Confirm the complete product designation, including any hardener, color or formulation suffix.
- Read the current SDS for handling, protective equipment, storage and disposal information.
The reported weight ratio for this record is 100A:100B. A weight ratio must not be used as a volume ratio without the appropriate density information.
Missing properties are not estimated. Similar values or shared application labels do not establish a drop-in replacement.