Epoxies, Etc. / Material reference
Epoxy10-3050R
10-3050R is listed by Epoxies, Etc. as an epoxy adhesive / resin system. This record connects 13 reported fields with 1 manufacturer document links. Review the original technical data sheet for the applicable test conditions and processing instructions.
40 MinutesManufacturer-reported
GreyManufacturer-reported
1.4Manufacturer-reported
75DManufacturer-reported
8,000Manufacturer-reported
4.1Manufacturer-reported
Technical & safety documents
1 linksFiles open on the manufacturer's document host. Region and language follow the source listing; confirm the revision inside the file.
10-3050R TDSEnglish · Not specified
Open file Reported specifications
13 fieldsMaterial and processing data
| Property | Reported value | Evidence |
|---|---|---|
| Pot life, 25°C | 40 Minutes | Technical data sheet · p. 1 |
| Color mixed | Grey | Technical data sheet · p. 1 |
| Specific gravity, 25°C/25°C | 1.4 | Technical data sheet · p. 1 |
| Hardness, shore D | 75D | Technical data sheet · p. 1 |
| Tensile strength, psi | 8,000 | Technical data sheet · p. 1 |
| Thermal conductivity, Btu in/ft2 hr °F | 4.1 | Technical data sheet · p. 1 |
| Dielectric strength, volts/mil | 485 | Technical data sheet · p. 1 |
| Dielectric constant, 60 Hz | 0.01 | Technical data sheet · p. 1 |
| Dissipation factor, 60 Hz | .015 | Technical data sheet · p. 1 |
| Volume resistivity, ohm-cm | 4.0 x 1014 | Technical data sheet · p. 1 |
Manufacturer classification
| Brand | Epoxies, Etc. |
| Technology | Epoxy |
| Market | Electronics |
Reported values are not independent test results. Original units and table wording are preserved. Extracted TDS rows can depend on the grade, component and source table headings; use the linked page to verify that context. Test methods, sample preparation and cure schedules may differ; consult the original TDS before making a performance comparison.
Selection & processing checks
Compare the complete resin–hardener system. A different hardener or cure schedule can change the cured properties.
- Is the stated ratio by weight or by volume?
- Do the thermal and mechanical values use the same cure schedule?
- Is the formulation designed for casting, bonding or encapsulation?
- Confirm the complete product designation, including any hardener, color or formulation suffix.
- Read the current SDS for handling, protective equipment, storage and disposal information.
Missing properties are not estimated. Similar values or shared application labels do not establish a drop-in replacement.
Other materials in this family
View collection| Material / manufacturer | Family | Key specification | Documents | Add to comparison |
|---|---|---|---|---|
| Free Form™ Habitat™ Black | Epoxy | Dough | 16 linked | |
| EPO-TEK® 301-2FL-T-NC | Epoxy | 535 cPs | 2 linked | |
| Epsilon™ PRO | Epoxy | 4,000 cps | 15 linked | |
| Tarbender™ | Epoxy | 1,100 cps | 2 linked |