Independent materials reference Manufacturer-linked sourcesResins · Elastomers · Technical documents
Epoxies, Etc. / Material reference
Epoxy

10-3003 Series

10-3003 Series is listed by Epoxies, Etc. as an epoxy adhesive / resin system. This record connects 13 reported fields with 6 manufacturer document links. Review the original technical data sheet for the applicable test conditions and processing instructions.

Technical data sheet Safety data sheet
ClearManufacturer-reported
45 minutesManufacturer-reported
1.24Manufacturer-reported
10,500Manufacturer-reported
3.0Manufacturer-reported
550Manufacturer-reported

Technical & safety documents

6 links
Files open on the manufacturer's document host. Region and language follow the source listing; confirm the revision inside the file.
Open original PDF
SDS
10-3003RBK SDSEnglish · Not specified
Open file
SDS
10-3003RCL SDSEnglish · Not specified
Open file
SDS
10-3003CTR SDSEnglish · Not specified
Open file
TDS
10-3003 High Viscosity TDSEnglish · Not specified
Open file
TDS
10-3003 TDSEnglish · Not specified
Open file
TDS
10-3003NS TDSEnglish · Not specified
Open file

Reported specifications

13 fields
Material and processing data
PropertyReported valueEvidence
ColorClearTechnical data sheet · p. 1
Pot Life, 100 gram mass @ 25°C45 minutesTechnical data sheet · p. 1
Specific Gravity, 25°C/25°C1.24Technical data sheet · p. 1
Tensile Strength, psi10,500Technical data sheet · p. 1
Thermal Conductivity, btu·in/hr·ft2·°F3.0Technical data sheet · p. 1
Dielectric Strength V/mil550Technical data sheet · p. 2
Volume Resistivity, ohm-cm1.1 x 1015Technical data sheet · p. 2
Dielectric Constant 103 cycles3.11Technical data sheet · p. 2
Dissipation Factor 103 cycles0.02Technical data sheet · p. 2
Manufacturer classification
BrandEpoxies, Etc.
TechnologyEpoxy
ApplicationGeneral Bonding
MarketElectronics
Reported values are not independent test results. Original units and table wording are preserved. Extracted TDS rows can depend on the grade, component and source table headings; use the linked page to verify that context. Test methods, sample preparation and cure schedules may differ; consult the original TDS before making a performance comparison.

Selection & processing checks

Compare the complete resin–hardener system. A different hardener or cure schedule can change the cured properties.

  • Is the stated ratio by weight or by volume?
  • Do the thermal and mechanical values use the same cure schedule?
  • Is the formulation designed for casting, bonding or encapsulation?
  • Confirm the complete product designation, including any hardener, color or formulation suffix.
  • Read the current SDS for handling, protective equipment, storage and disposal information.

Missing properties are not estimated. Similar values or shared application labels do not establish a drop-in replacement.

Other materials in this family

View collection
Material / manufacturerFamilyKey specificationDocumentsAdd to comparison
Free Form™ Habitat™ BlackSmooth-OnEpoxyDoughMixed Viscosity16 linked
EPO-TEK® 301-2FL-T-NCEpoxy TechnologyEpoxy535 cPsViscosity (23°C) @ 100 rpm2 linked
Epsilon™ PROSmooth-OnEpoxy4,000 cpsMixed Viscosity15 linked
Tarbender™Smooth-OnEpoxy1,100 cpsMixed Viscosity2 linked
Related records are browsing suggestions, not validated substitutes.