Independent materials reference Manufacturer-linked sourcesResins · Elastomers · Technical documents
Smooth-On / Material reference
Polyurethane

Smooth-Cast™ 325

Smooth-Cast™ 325 is listed by Smooth-On as a polyurethane casting resin. The source reports mixed viscosity of 100 cps, mix ratio by weight of 115A:100B, pot life of 2.5 minutes. This record connects 18 reported fields with 2 manufacturer document links. Review the original technical data sheet for the applicable test conditions and processing instructions.

Technical data sheet Safety data sheet
100 cpsManufacturer-reported
115A:100BManufacturer-reported
2.5 minutesManufacturer-reported
10 minutesManufacturer-reported
72Manufacturer-reported
1.07 g/ccManufacturer-reported

Technical & safety documents

2 links
Files open on the manufacturer's document host. Region and language follow the source listing; confirm the revision inside the file.
Open original PDF
TDS
Technical BulletinEnglish · Not specified
Open file
SDS
Smooth-Cast 325 SDS | EnglishEnglish · United States & Canada
Open file

Reported specifications

18 fields
Material and processing data
PropertyReported valueEvidence
Mixed Viscosity100 cpsManufacturer table
ColorClear AmberManufacturer table
Mix Ratio By Volume1A:1BManufacturer table
Mix Ratio By Weight115A:100BManufacturer table
Pot Life2.5 minutesManufacturer table
Cure Time10 minutesManufacturer table
Shore D Hardness72Manufacturer table
Specific Gravity1.07 g/ccManufacturer table
Specific Volume25.9 cu. in./lb.Manufacturer table
Compressive Strength3,500 psiManufacturer table
Elongation @ Break10 %Manufacturer table
Flexural Modulus101,000 psiManufacturer table
Flexural Strength3,690 psiManufacturer table
Heat Deflection Temp120 °FManufacturer table
Shrinkage0.01 in./in.Manufacturer table
Tensile Modulus140,000 psiManufacturer table
Tensile Strength3,170 psiManufacturer table
Compressive Modulus36,500 psiManufacturer table
Reported values are not independent test results. Original units and table wording are preserved. Extracted TDS rows can depend on the grade, component and source table headings; use the linked page to verify that context. Test methods, sample preparation and cure schedules may differ; consult the original TDS before making a performance comparison.

Selection & processing checks

Distinguish rigid casting plastics, elastomeric rubbers and foams. Their density, hardness scales and processing requirements are not interchangeable.

  • Is this a solid material or an expanding foam?
  • Which hardness scale and cure conditions are reported?
  • What moisture-control and preparation steps does the manufacturer require?
  • Confirm the complete product designation, including any hardener, color or formulation suffix.
  • Read the current SDS for handling, protective equipment, storage and disposal information.

The reported weight ratio for this record is 115A:100B. A weight ratio must not be used as a volume ratio without the appropriate density information.

Missing properties are not estimated. Similar values or shared application labels do not establish a drop-in replacement.

Other materials in this family

View collection
Material / manufacturerFamilyKey specificationDocumentsAdd to comparison
Shell Shock™ FASTSmooth-OnPolyurethane3,000 cpsMixed Viscosity15 linked
Shell Shock™ SLOWSmooth-OnPolyurethane3,000 cpsMixed Viscosity15 linked
Smooth-Cast™ 300Smooth-OnPolyurethane80 cpsMixed Viscosity16 linked
Smooth-Cast™ 300QSmooth-OnPolyurethane80 cpsMixed Viscosity16 linked
Related records are browsing suggestions, not validated substitutes.