Independent materials reference Manufacturer-linked sourcesResins · Elastomers · Technical documents
Smooth-On / Material reference
Polyurethane

EZ~Spray™ StyroCoat™

EZ~Spray™ StyroCoat™ is listed by Smooth-On as a polyurethane casting resin. The source reports mixed viscosity of Variable, pot life of 2 seconds, cure time of 60 minutes. This record connects 17 reported fields with 3 manufacturer document links. Review the original technical data sheet for the applicable test conditions and processing instructions.

Technical data sheet Safety data sheet
VariableManufacturer-reported
2 secondsManufacturer-reported
60 minutesManufacturer-reported
80Manufacturer-reported
1.12 g/ccManufacturer-reported

Technical & safety documents

3 links
Files open on the manufacturer's document host. Region and language follow the source listing; confirm the revision inside the file.
Open original PDF
TDS
Technical BulletinEnglish · Not specified
Open file
Guide
E-84 Flame Rating Test ResultsEnglish · Not specified
Open file
SDS
EZ-Spray StyroCoat SDS | EnglishEnglish · United States & Canada
Open file

Reported specifications

17 fields
Material and processing data
PropertyReported valueEvidence
Mixed ViscosityVariableManufacturer table
ColorOff WhiteManufacturer table
Mix Ratio By Volume1A:1BManufacturer table
Pot Life2 secondsManufacturer table
Cure Time60 minutesManufacturer table
Shore D Hardness80Manufacturer table
Specific Gravity1.12 g/ccManufacturer table
Specific Volume24.7 cu. in./lb.Manufacturer table
Compressive Strength5,000 psiManufacturer table
Elongation @ Break20 %Manufacturer table
Flexural Modulus205,000 psiManufacturer table
Flexural Strength6,400 psiManufacturer table
Heat Deflection Temp130 °FManufacturer table
Shrinkage0.015 in./in.Manufacturer table
Tensile Modulus131,000 psiManufacturer table
Ultimate Tensile3,170 psiManufacturer table
Compressive Modulus47,600 psiManufacturer table
Reported values are not independent test results. Original units and table wording are preserved. Extracted TDS rows can depend on the grade, component and source table headings; use the linked page to verify that context. Test methods, sample preparation and cure schedules may differ; consult the original TDS before making a performance comparison.

Selection & processing checks

Distinguish rigid casting plastics, elastomeric rubbers and foams. Their density, hardness scales and processing requirements are not interchangeable.

  • Is this a solid material or an expanding foam?
  • Which hardness scale and cure conditions are reported?
  • What moisture-control and preparation steps does the manufacturer require?
  • Confirm the complete product designation, including any hardener, color or formulation suffix.
  • Read the current SDS for handling, protective equipment, storage and disposal information.

Missing properties are not estimated. Similar values or shared application labels do not establish a drop-in replacement.

Other materials in this family

View collection
Material / manufacturerFamilyKey specificationDocumentsAdd to comparison
EZ~Spray™ PlasticSmooth-OnPolyurethaneVariableMixed Viscosity2 linked
Feather Lite™Smooth-OnPolyurethane410 cpsMixed Viscosity2 linked
Smooth-Cast™ 385Smooth-OnPolyurethane3,000 cpsMixed Viscosity2 linked
TASK™ 15Smooth-OnPolyurethane600 cpsMixed Viscosity15 linked
Related records are browsing suggestions, not validated substitutes.