Independent materials reference Manufacturer-linked sourcesResins · Elastomers · Technical documents
Smooth-On / Material reference
Polyurethane

Econ™ 60

Econ™ 60 is listed by Smooth-On as a polyurethane rubber. The source reports mixed viscosity of 1,400 cps, mix ratio by weight of 1A:1B, pot life of 6 minutes. This record connects 15 reported fields with 2 manufacturer document links. Review the original technical data sheet for the applicable test conditions and processing instructions.

Technical data sheet Safety data sheet
1,400 cpsManufacturer-reported
1A:1BManufacturer-reported
6 minutesManufacturer-reported
16 hoursManufacturer-reported
60Manufacturer-reported
1.04 g/ccManufacturer-reported

Technical & safety documents

2 links
Files open on the manufacturer's document host. Region and language follow the source listing; confirm the revision inside the file.
Open original PDF
TDS
Technical BulletinEnglish · Not specified
Open file
SDS
Econ 60 SDS | EnglishEnglish · United States & Canada
Open file

Reported specifications

15 fields
Material and processing data
PropertyReported valueEvidence
Mixed Viscosity1,400 cpsManufacturer table
ColorTranslucent AmberManufacturer table
Mix Ratio By Volume1A:1BManufacturer table
Mix Ratio By Weight1A:1BManufacturer table
Pot Life6 minutesManufacturer table
Handling Time4 hoursManufacturer table
Cure Time16 hoursManufacturer table
Shore A Hardness60Manufacturer table
Specific Gravity1.04 g/ccManufacturer table
Specific Volume26.7 cu. in./lb.Manufacturer table
Die C Tear Strength85 pliManufacturer table
Elongation @ Break500 %Manufacturer table
100% Modulus82 psiManufacturer table
Shrinkage<0.001 in./in.Manufacturer table
Tensile Strength350 psiManufacturer table
Reported values are not independent test results. Original units and table wording are preserved. Extracted TDS rows can depend on the grade, component and source table headings; use the linked page to verify that context. Test methods, sample preparation and cure schedules may differ; consult the original TDS before making a performance comparison.

Selection & processing checks

Distinguish rigid casting plastics, elastomeric rubbers and foams. Their density, hardness scales and processing requirements are not interchangeable.

  • Is this a solid material or an expanding foam?
  • Which hardness scale and cure conditions are reported?
  • What moisture-control and preparation steps does the manufacturer require?
  • Confirm the complete product designation, including any hardener, color or formulation suffix.
  • Read the current SDS for handling, protective equipment, storage and disposal information.

The reported weight ratio for this record is 1A:1B. A weight ratio must not be used as a volume ratio without the appropriate density information.

Missing properties are not estimated. Similar values or shared application labels do not establish a drop-in replacement.

Other materials in this family

View collection
Material / manufacturerFamilyKey specificationDocumentsAdd to comparison
Econ™ 80Smooth-OnPolyurethane1,200 cpsMixed Viscosity2 linked
Simpact™ 60ASmooth-OnPolyurethane1,100 cpsMixed Viscosity15 linked
TASK™ 16Smooth-OnPolyurethane1,400 cpsMixed Viscosity14 linked
Clear Flex™ 50Smooth-OnPolyurethane250 cpsMixed Viscosity2 linked
Related records are browsing suggestions, not validated substitutes.